Labākais wifi transportlīdzekļa DVR blackbox GPS 4K stāvvietas monitors D30H

How to connect wifi with mobile phone – Car camera 4K GPS

1. Download “Timacam” app to your cell phone.
2. Long press “Menu” button to switch in wifi.
3. Select the wifi NVT-CARDVxxxx on your phone settings.
4. Press “Timacam” app to connect.

Piezīme

1. Only can connect wifi on car dvr wifi hotspot, can’t connect wifi through router.
2. When connected to WiFi, you can only view normal speed video playback on your phone. To view fast forward (+2+4+8) or slow release (-2-4-8), you can only do so within the DVR or third party app.

WiFi settings on the cell phone for the camera can only be used to set:

• Video resolution
• Collision sensor
• Record time
• WDR
• Motion detection
• Time watermark
• Format Car Cam SD card
• Restore factory settings

GPS Player (External GPS Module Optional)

If you want to use this GPS Player to view the speed and route, you need to purchase the GPS bundle separately.

The GPS module can record the driving track, latitude, longitude, and car speed. After installing the Player Software, you can view a map of the track and the speed.

• No battery inside, cannot support switch on without car charger charging.
• The Capacitor is used to hold the date and time settings.
• More safe and stable. (The same as TV, no battery inside)
• It is recommended to use the car charger provided to charge/power up the device in the car.

How to support 24 hours Motion Detection & Parking Mode?

• Purchase a Range Tour 12/24V to 5V Inverter Converter Mini USB Hardwire Kit Wire for Car DVR Dash Cam Car Camera Car Charger Cable. (choose bundle)
• The Car DVR comes with a car charger in the parcel.
• Ierīce automātiski ierakstīs, kad automašīna ieslēgsies, un izslēgsies, kad motors būs izslēgts.
• If you need 24 Hours recording or Motion Detection and Parking Mode, you can purchase the bundle with the Hardwire kit.

Q&A：

Q：How to install the 3M Holder?

1. Use the free gifts Mounting Membrane.
2. Tear one of the membranes.
3. Take a tissue and slowly smooth the film.
4. Rip the red paper of the 3M bracket.
5. Attach the 3M bracket to the membrane.
6. It is easy to tear if you want to replace it elsewhere on the car window.

Q: How about night vision?

A: Night video and 4 Infrared lights inside

The camera has two lenses, one inside and the other outside.

The outside camera has a night vision sensor. At night, it works well only if there is any light, such as car headlights or road lights. This doesn’t mean the front camera can record without light.

The inside camera has four IR lights. It can record without any lights at night. When you switch on the IR function, the video is in black and white.

When the infrared function is turned off during the day, the video turns pink, because there are 4 infrared lights, so it absorbs a lot of ultraviolet light during the day.

If you don’t like the pink video, you can switch on the IR function in the DVR settings, and it will turn to black and white version.

The camera has two lenses, one inside and the other outside.

The inside camera has 4 IR lights. It can record without any lights at night. When you switch on the IR function, the video is in black and white.

If there are no these 4 IR lenses, it can’t record anything at night in the car because there are no road lights and car lights inside the car. Therefore, it needs 4 infrared lights.

1. Press the menu button once to enter the video settings.
2. Use the up or down button to navigate to the “Resolution” option.
3. Press the OK button to view the available resolutions:

Dual Lens:

• P30+P30 (Means: 1080P+1080P 30fps) (ADAS supports this size)

Single Lens (Front Exterior Camera):

• 2160P 24 fps
• 1440P (Default setting)
• 1080P 60 fps
• 1080P 30 fps (ADAS supports this size)

4. Use the up or down button to select.
5. Press the OK button to confirm your selection.
6. Press the menu button to exit the settings.